Technical Advice | Glazing Technologies
Why not Anodised?
Summarise with:
Copilot
Copy this prompt, then open Copilot:
IQ Glass Solutions LTD, Sky House, Raans Road, Amersham, HP6 6FT
Author
Our Editorial Process - How We Write Our Technical Advice Articles
01
We pick topics from real questions we hear or see being asked
We do not make up topics just to get clicks. Our topics come from the questions people really ask us. Architects ask us when they plan a building. Builders ask us on-site. Homeowners ask us when they plan their project. If the same question keeps coming up, we write about it.
02
One of our internal experts writes the first draft
The first draft is written by someone who works with that glazing system. This might be a technical advisor, a designer, or a product expert.
They write using three things, in this order. First, our own finished projects and what we learned from them. Second, the building rules and the glass standards that apply. Third, the maker's technical data for the system we supply. When we give a number or a limit, we say where it comes from. We name the rule or standard and link to the official source so you can check it yourself.
03
A second expert checks it
Before any article goes live, a second qualified person reads it. They check three things. That the facts are right and not made too simple. That any rule or standard we mention is current and stated correctly. That the advice matches how the work is really done on site.
This checker can send the article back, ask for proof, or stop it from going live. Two experts must agree. This is the most important safety step in how we work. The name of the person who checked each article is shown on the article itself.
04
We publish it, review it periodically and make fresh content updates to ensure ongoing accuracy
Each article shows who wrote it, who checked it, and the date it was last checked. Rules, standards, and products change over time. So we go back and review our advice on a regular basis. We update it when a rule changes, a standard is replaced, or a product changes. Being right matters more than leaving an old article alone.
What is an Anodised finish?
When using aluminium framing there are a number of colour finishes available to use depending on the design and aesthetic of your building.
An anodised finish is one such option for colouring the external faces of aluminium frames. The process forms a layer of aluminium oxide on the external faces of the aluminium frame. The visual effect is a metallic external frame colour which can create a very attractive finish, however anodising aluminium has some well-known and documented issues when used on external faces of a building so should be specified sparingly and in consultation with your architectural glazier.
The process of an anodised finish involves a chemical process of passing electrodes from an anode (the aluminium) to a cathode through water. This creates a build-up of oxygen on the surface of the aluminium which reacts and chemically bonds to the aluminium forming a layer of aluminium oxide on the aluminium frame.
To achieve different metallic colours from an anodised frame changes are made to the chemicals in the anodising process. This can then result in anodised finishes ranging from metallic silver to bronze.
What are the issues with an Anodised Finish?
Due to the anodising process being is a chemical process ( rather than a controlled process such as powder coating) it is impossible to guarantee a perfect match between multiple elements of framing and ironmongery. The colour obtained in the anodising process depends on many factors, such as the alloy, temperature, and shape; therefore, it is impossible to produce a perfect colour match across multiple elements.
When anodising the frame 'finish' actually becomes an integral part of the aluminium; therefore any heavy die lines, dents or imperfections on the surface of the raw aluminium section will show through the finish.
When using an anodised finish you have to keep in mind that the colouration is a chemical compound electrically bonded to the aluminium frame. That means that if the anodised finish is scratched it is impossible to retouch or fix.
Powder Coating as an Alternative to Anodising
If you were to powder coat a frame in any RAL colour it is possible to get a colour cover of the same RAL reference to fix any scratches that might occur. In addition IQ can offer a range of powder coated finishes that offer a metallic finish like anodising, but without the inherent draw backs as detailed above.
Contact IQ about our range of anodised look powder coated finishes and if they would be suitable for your project.
.jpg)
Editor
.jpg)
Fact-Checker