Our specialist steel fabrication factory works with a wide range of fire rated steel systems to provide you with options suitable for a variety of project designs and requirements.
Our steel fire rated doors can be designed with a thermally broken frame for external use or non-thermally broken for internal fire rated doors.
Fire rated steel frames have a significantly larger frame than non-fire rated systems can achieve but we look to achieve the most minimal frame finish possible.
Using fire rates steel frames, coupled with specialist fire rated glass, we can create steel doors with fire ratings of EI30, EI60 or EI90 as required.
The fire rated frames can be created from either galvanised steel or stainless steel for a different aesthetic effect, but the same high performance for fire protection.
They are available as single doors, double doors or fire doors within a larger fire rated glass façade of frameless fire rated glass of steel framed.
Additional and technical information about Steel Framed Fire Rated Doors, including technical information and typical design information.
Steel framed fire rated doors can be created in a range of opening configurations for use on different door openings:
Doors with Top Lights or Side Lights
Doors within Fire Rated Glass Facades (Frameless or Framed)
Our EI30 steel fire rated doors are also available as sliding doors if required that can slide over fire rated glass, into pockets and can be designed with integrated break out doors within the frame for emergency exit.
Our steel fire rated doors are available in sizes of up to 1.4m wide by 2.5m high for a single door opening or 2.6m wide by 2.5m high for a double door opening.
A double or single fire rated door can be integrated into a fire rated glass façade of steel framing or frameless fire rated glass if a larger glass elevation is required.
As well as achieving high levels of integrity and insulation for fire rated doors our steel framed fire rated systems also have additional performance standards including emergency exit classification, smoke protection classification and burglar resistance.
Fire Rated Doors are a common requirement on larger building designs that will be occupied by lots of people. The use of fire rated doors allows essential fire exit routes to be protected from fire in the event of an emergency.
Steel framing of fire rated doors is extremely robust meaning that they are perfect doors for areas of high traffic where the doors will be opened and closed multiple times a day.
With fire ratings up to 90 minutes integrity and insulation as standard our steel fire rated doors are perfect for larger commercial buildings, hotels and schools.
This university gymnasium used 30/30 fire rated steel doors to create a large, open plan bright space with adequate protection for fire spread.
The steel framing of these fire rated doors provide the university with elegant door structures with low maintenance and a long life expectancy.
Installed both on their own and within large fire rated glass screens the bespoke designs of these doors allowed them to be integrated into the historical buildings.