Slim Framed Sliding Windows

Our minimal windows sliding door system can be expertly engineered to be used as a slim framed sliding window.


Find out more

Sliding 21mm Framed Windows

Architects and designers are always looking for ways to create the slimmest framed window possible to their contemporary design schemes.

IQ’s slim framed sliding door system can be used as the slimmest framed opening window system available, maintaining the 21mm vertical framing profile of the sliding glass doors but at the shorter heights of windows.

As there are no issues of feasibility in large opening windows swinging inwards or outwards these sliding windows can be designed and installed at large sizes, enabling large opening elements to windows for uninterrupted views and suitable ventilation.

Even full height windows can be created out of these slim framed sliding windows by integrating a frameless balustrade into the window opening to create a modern Juliette Balcony with slim frames.

Frameless Windows

The aluminium framed windows have greater flexibility in terms of design. As well as their large available opening sizes the windows can slide open away from a corner, leaving no framing in its wake and they can also be designed to slide into a hidden pocket within the wall for a completely open window aperture.

Locking of these slim framed windows utilises the same small thrust lever handle as the slim framed sliding door system, creating a secure two point locking system security tested to WK2. For harder to reach windows electronic locking can also be used. The electronically locked windows can then be coupled with an electronic drive to allow for automatic ventilation on higher level windows.

Where the slimmest frames are required in opening windows the slim framed sliding window from IQ is the obvious option, providing large sliding windows with framing of only 21mm.

See them at the Showroom

These slim sliding windows are available to view in person at the IQ Glass architectural glazing showroom. Installed into the external skin of our dedicated minimal windows® building, the sliding windows are shown in a dual sliding configuration (both panes slide). One of the sliding panes shows the standard thrust lever locking handle, and the other shows the manual internal key locking solution.

At the centre you see the minimal 21mm sightline of these sliding windows which perfectly matches the slim aluminium frames of the minimal windows® sliding doors. The slim frames of the aluminium window perfectly encompass the great vista beyond (thanks to the power of digitally printed glass).

Want to come along to the showroom? Contact Us to book your personal one-to-one meeting with a technical advisor.


Standard Details

The slim framed sliding glass windows from IQ Glass are manufactured from the same slim aluminium framing section as minimal windows slim framed sliding glass door. All framing details are therefore the same.

The vertical sightlines of the slim sliding windows is 21mm, the slimmest frame window system available.

Surrounding fixed framing is 38mm and can be hidden by the building finishes.

Double or triple glazing can also be specified depending on the thermal performance needed. 


The slim framed sliding glass doors operate with an integrated two point locking system that is built within with the 21mm vertical profile of these sliding windows. The integrated two point locking system is operated by a small aluminium thrust lever handle, when the handle is turned 180 degrees the steel shot bolts integrated within the 21mm profile fit into the head and the base structure of the window opening to lock the window.


If partial opening for ventilation is required with your windows you can install these slim framed sliding windows with our Slot Aeration locking system.

Here you can lock the sliding windows into a slightly open position, either 20mm or 40mm open. This creates a ventilation opening the full height of the window without having to open the windows fully.

Integrated Glazing Bars

Our slim sliding window system be designed with an integrated glazing bar design. The aluminium glazing bars are applied to the surface on the glass both inside and out in the pattern of your choosing.

Within the gas cavity of the double-glazed unit we include a ‘dummy spacer bar’. This sits within the gas cavity with the glazing bars applied to the surface of the glass on either side. By doing this we create a much more authentic glazing bar design in keeping with more traditional building designs.

Due to the nature of integrated spacer bars and slim elements of aluminium we recommend a maximum glass size of 1300mm x 2440mm per glass unit with integrated glazing bars.