IQ Glass Solutions LTD, Sky House, Raans Road, Amersham, HP6 6FT
Are you working on a residential project that’s located in a noisy location? Sound reduction windows could be the solution to reduce the noise from the outdoor environment to create a serene indoor environment. Noise pollution is an issue that causes homeowners a lot of nuisance along with light pollution. Noise pollution is frequently seen in urban areas, compared to quiet rural villages, due to the frequency of noisy buses, trains, police sirens and people traffic.
Architectural glazing experts have worked for many years to design sound reduction windows - but are sound proof windows really sound reduction? To create sound reduction glass for windows, a laminate is used in the glass manufacture which reduces noise transmission by approximately 10 decibels. The laminate used in the glass creates a barrier that captures the sounds, preventing noise from travelling into the internal living spaces of properties.
How does sound reduction glass work? To understand how sound reduction glass works here is a brief technical explanation about this glazing solution.
Sound is a pressure wave that causes vibrations which are translated and perceived as noise in your ear (which is measured by decibels (dB)). sound reduction windows are designed to reduce the sound waves passing through the glass, which in turn decreases the acoustic energy of the sound wave – reducing the level of sound that can be heard indoors.
Sound reduction glass doesn’t have to just be used to create sound reduction windows; this specialist glass can be used to produce sound reduction glass walls. This innovative glass technology allows homeowners to enjoy stunning uninterrupted views from the quiet atmosphere within their homes. sound reduction glass is often referred to as sound reduction glass or noise reduction glass as the laminate within the glass is able to reduce the sound decibels traveling through the glass, rather than eliminating them completely.
Acoustic interlayers are laminated between toughened pieces of glass to produce a glazing unit with much improved acoustic performance.
The highly sound insulating PVB interlayers are laminated between glass panels using normal interlayer lamination methods of heat and pressure creating a glass unit with a lower overall Rw value measured in Db.
Every glass thickness and composition vibrates differently at different frequencies meaning that at some frequencies glass sound insulation can be very low. The introduction of an acoustic interlayer into a glass construction reduces this ‘critical frequency’ effect in the glazed element meaning there is no dip in the glass performance for certain sound frequencies and increasing the overall sound insulation for an installation.
These acoustic interlayers can reduce the sound transmission through glass to between 35Db to 49Db depending on glass makeup.
The aim of acoustic insulation glass is not to stop sound coming through the glass units altogether, which is nearly impossible, but is to reduce the volume of noise that can travel through the glass towards 100Hz, making any background noise insignificant enough to be ignored.
The acoustic interlayers used within sound reduction glass are completely transparent and appear as standard laminated glass leaf. The laminated glass panel can then be installed into a double glazed unit for external use, installed into framework or used as internal partitioning elements.
Additional changes to a glass specification such as triple glazing, differing thicknesses of glass and different gas cavity thicknesses can also assist in any acoustic insulation needed.
Get in touch with the team at IQ Glass here.
Acoustic Interlayers are able to be included in almost any glass installation and are available in sizes up to 6m x 3.21m. The minimum size of an acoustic glass unit is 300mm x 300mm.
Other elements of the glass specification such as glass thickness will be determined by the glass installation itself.
Get in touch if you wish to learn more about some of the most common glass specifications for acoustic glass.
For the same thickness of glass, glass with an acoustic reduction interlayer achieves an average increase, expressed in Rw (BS EN ISO 717), of between 3 dB compared with conventional laminated glass and 5 dB compared with monolithic glass.
Acoustic interlayers overcome the drop in the acoustic insulating performance of glass at the critical frequency, in both single and double glazing. It therefore ensures optimum acoustic performance.
A change in just 2dB in the noise reduction through a piece of glass can half the amount of noticeable sound that can penetrate the glazing.
Building Regulations Part E
Building Regulations Part E governs the acoustic insulation values that new buildings in England should adhere to to create comfortable and inviting living and working spaces.
Part E of Building Regs covers:
New walls and floors of new build homes and buildings that are being changed into housing
The Acoustic Insulation between other sleeping areas such as hotel rooms, rooms in a boarding house and student housing.
The acoustic performance of common areas in residential apartment blocks
Acoustic Reduction in school buildings.
Requirement E1 states:
“E1: Protection against sound from other parts of the building and adjoining buildings
“Dwelling-houses, flats and rooms for residential purposes shall be designed and constructed in such a way that they provide reasonable resistance to sound from other parts of the same building and from adjoining buildings.”
Internal and external floors and walls of a new built, purpose built house are recommended to have an Rw value of more than 40 dB.
Slim Triple Glazed Glass Sliding Doors
Slim triple glazed glass sliding doors offer exceptional energy efficiency, noise reduction, and security while providing a sleek and modern look. They are perfect for high-end residential and commercial projects.